Software | |
Switching | Support port configuration, rate configuration, storm suppression, and port statistics Support port-based VLAN and 802.1Q VLAN Support MAC address aging |
CAN/Serial | Support various network operation modes such as UDP, TCP Client, TCP Server, and UDP multicast Support byte count statistics for both sending and receiving data between the serial interface and the network Support CAN operating modes, including normal mode, listen-only mode, and loopback mode Provide CAN ID filtering and CAN frame statistics |
Redundancy | Support private ring network technology MW-Ringv1/v2 Support RSTP (Rapid Spanning Tree Protocol) and compatible with STP (Spanning Tree Protocol) |
Multicast | Support static multicast MAC address binding |
Management and Maintenance | Support static IP configuration Support QoS (Quality of Service) with 802.1P/DSCP/Port priority mapping, providing control over absolute and relative priorities Support port mirroring, Ping, and alarms Offer user management with different permission levels, online reboot, factory reset, system upgrade, and configuration file upload/download Support MixView and MaxView management |
Switch Capability | |
Processing Type | Store-and-Forward |
Backplane Bandwidth | 1.2Gbps |
Buffer Size | 768kbit |
MAC Table Size | 2K |
Interface | |
100M Fiber Port | 1/2*100Base-FX ports (single-mode/multi-mode, SC/FC/ST, wavelength, and transmission distance are optional) |
100M Copper Port | 4/3*10/100Base-T(X) auto-sensing RJ45 ports, support full/half-duplex and auto MDI/MDI-X |
Serial Port | Interface Type: 2*RS232/485 (optional) Interface Signals: A, B, GND, TX, RX Baud Rate: 600bps-115200bps Data Bits: 7-bit, 8-bit Stop Bits: 1-bit, 2-bit Parity: None, Odd, Even, Mark, Space Connection: 6-pin with a 3.81mm pitch locking terminal connector |
CAN | Interface Type: 2 CAN ports (optional) Interface Signals: CANH, CANL, GND Baud Rate: 5kbps-1000kbps Connection: 6-pin with a 3.81mm pitch locking terminal connector Termination Resistor: Built-in 120Ω termination resistor, configurable via a DIP switch |
Relay | 1 relay alarm output with 3 positions and a 3.81mm pitch locking terminal connector |
Button | Factory Reset |
Status LED | Power indicator Operation indicator Ring network indicator Interface indicator Ethernet port speed indicator Serial/CAN indicator |
Power Supply | |
Input Voltage | DC9~60V, dual power redundancy, non-polarity |
Power Consumption Picks for you 8pcs RJ45+2pcs SFP POE Gigabit Ethernet switch 927 reviews 0 sold ★ 5.0 16-port Gigabit Ethernet switch 498 reviews 0 sold ★ 5.0 24 port switch 3163 reviews 0 sold ★ 5.0 8 port Layer 2 manages industrial switches 4547 reviews 0 sold ★ 5.0 L3 Managed Switch 10 Base-T Ethernet ports,2 SFP ports 2720 reviews 0 sold ★ 5.0 UOTEK 10/100M 8-Port Industrial Ethernet Switch 4773 reviews 0 sold ★ 5.0 OTEK UT-65208F Series Managed Industrial Ethernet Switch with Serial Ports 6131 reviews 0 sold ★ 5.0 UOTEK UT-6406GM serial 4 Electrical Ports + 2 Optical Ports Full Gigabit Managed Ethernet Switch 9696 reviews 0 sold ★ 5.0 8 Ports Gigabit Combo + 4 Ports Gigabit SFP + 16 Gigabit T(x) Ports Rack-mount Managed Industrial Ethernet Switch 6036 reviews 0 sold ★ 5.0 [4 Gigabit + 24 Gigabit Battery] managed industrial switch 7768 reviews 0 sold ★ 5.0 4 Ports Gigabit Combo + 24 Ports 10/100M T(x) Rack-mount Unmanaged Industrial Ethernet Switch 6675 reviews 0 sold ★ 5.0 5 Ports Gigabit T(x) Din-Rail Unmanaged Industrial Ethernet Switch 4206 reviews 0 sold ★ 5.0 Subscribe | |
![[4 Gigabit + 24 Gigabit Battery] managed industrial switch](https://lele-1306719578.cos.ap-guangzhou.myqcloud.com/1000000336/image/6614bc8467d39.png)
